Vonage VT2542 Guide de l'utilisateur

Quick Start GuideVonage®Device Motorola VT2542M

The default name of your wireless network is ‘MOT-1-xx.’ To change the default settings and enable securityencryption (highly recommended) see the VT2

9Power – When the power light stops blinking and is a solid green, this indicates that your Vonage Device has started up properly. Note that both the

10You can solve many installation issues by resetting all of yourequipment:1. First, power down in this order: a. Computerb. Router, if you have onec.

1. Be sure your phone is plugged in to the Green Phone Port 1 on the rear panel of the Vonage Device, and that it is disconnected from the wall jack t

12Visit the Vonage website and enter yourusername and password into the customerlogin area. Your Vonage Dashboard givesyou everything you need at your

13Enjoy your Vonage Digital Phone Service!If you have any questions please visit: www.vonage.com/help (U.S.) or www.vonage.ca/help (Canada)If you’re s

• High-speed broadband Internet connection, such as Cable or DSL• A valid Vonage account• If you purchased your Vonage Device at a retail location, ma

1. If you purchased your Vonage®Device from a retail store, you must first activate your Vonage phone service. (You will need to provide the MAC ID on

Welcome1to the Quick Start Guide for Vonage®.Get ready to start saving money on your phone bill with Vonage –just follow these easy step-by-step instr

NOTE: Ensure you are using the power supply provided with theVonage Device. Using the wrong power supply could result in damageto your equipment.*Not

3Step 2:Set up your Vonage®Device1. Unplug your existing modem’s power cord. Leave your modem connected to your cable or DSL phone line that supplies

4. Connect one end of the blue cable to the Ethernet port on your modem. Connect the other end to the blue portlabeled “Internet” on the back of the V

6. Now plug your modem’s power cord back into an electrical power outlet. NOTE: You should allow enough time for your modem to complete its start-uppr

1. Unplug the modem for at least 60 seconds. If left off for less than 60 seconds, it might still “remember” old information that could prevent it fro

Connecting your phone1. Plug a standard telephone cord into your phone. NOTE: If not done so already, disconnect phone cord from wall.2. Plug the othe